- Angle Cutting
- Channel Cutting
- Flat Cutting
- Round Bar Cutting
- Square Bar Cutting
- T-section cutting
- Hydraulic Iron Worker is designed to give an effective solution to all the cutting and punching problems of flat and Section with satisfactory work quality from robust and compact machine.
- Unique compact design by using ultrasonically tested steel plates.
- International brands hydraulic & electrical components ensure trouble free operation.
- Five work station catering 7′ different operation. Parallel operation of punching station with other work station gives higher productivity.
- Direct shearing avoids any waste of materials.
- Main Drive motor.
- Electric Control Panel.
- Fine stroke adjustment rod with limit switch.
- Manual job Clamping Device.
- Blade for Angle Cutting, Channel Cutting,
- Flat Cutting & Notching.
- Pair of foot Switch.
- Manual back gauge.
- Blade for Round Bar Cutting, Square Bar Cutting,
- T-Section Cutting, Channel Cutting & Punching.
- High Speed System for more number of stroke/minute.
- First fill hydraulic oil.
|1 CAPACITY||SIGMA M||SIGMA H|
|Flat Shear mm||150x 16, 250x 12||150×25, 250×20|
|Angle mm||100x100x10||140x140x 12|
|Round mm||Ø cp 32||Ø cp 40|
|Square Bar mm||32||32|
|Punching mm||Ø cp 40 x 8||Ø cp 40×12|
|Notching||80 x 40 x 5||80 x 40 x 8|
|Motor kW (HP)||5 Hp||7.5 Hp|
|No. of Stroke /min.||15||15|
|(20mm travel for punching side)|
|Throat Depth mm||250||300|
|Dimension mm||1400 x 900 x 2000||1550 x 1000 x 2100|